40m by 6m by 0.5m (Ellipsoidal) FerroConcrete Beam
A funny thing happened to me today - somebody asked me where's the "wing"
graphics on your site. You'll be pleased to know here they are again.
The real application is a Bus Station canopy.
The Beam consists 30ish transverse ribs and 4 longitudinal ribs made from a mixture
of 6mm and 8mm re-bar. Each rib is wrapped with 2 layers of chicken mesh then
weld-mesh is used to create the rib's full thickness.
The beam was made up in 5 sections for the final transportation.
Page2