Square Twisted Transformers first created 13/04/08 - last modified 13/04/08 Page Author: Ty Harness
These are new developments created by STOS 1.05 beta and are for testing purposes only.



text here text here
Figure 1 - Test 1 - 300x300 to 100x100 and 100 elevation height twisted to 45deg.


test1.pdf
test1.dxf
test1dimmed.pdf


text here text here
Figure 2 : Test 2 - 100x100 to 100x100 and 100 elevation height twisted to 45deg.


test2.pdf
test2.dxf


text here
Figure 3 Test 3 - 100x100 to 100x100 and 100 elevation height twisted to 45deg with and a 21(approx) offset x and 21 offset y to create vertical side walls.


test3.pdf
test3.dxf


text here
Figure 4 - Test 4 300x300 to 100x100 and 100 elevation tilting 10 degrees


test4.pdf
test4.dxf

Known to be incorrect - kinking correct on half pattern only mirror half pattern and bend kinks handed.


text here
Figure 5 - test5 rectangular 300x200 to 100x100 twisted 45deg and offset x 20 elevation 100


test5dimmed.pdf




Tested in Firefox 2.04: FireFox homepage